defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
GB-1
GB-2
GB-3
UNPACKING
Remove all packaging from the toaster. Retain the packaging. If you dispose of
it please do so according to local regulations.
The following items are included:
• The Main Unit
• Instruction Manual
(P.N.: S02AT10-001)
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0870 6001 338 for assistance.
FIRST TIME USE
The first time you use your toaster we suggest that you operate it following
the
TOASTING BREAD
steps, except without bread. Please note there may
be manufacturing residue or oil remaining in the toaster or heating element.
Odour may be emitted the first time you use it. This is normal and will not
occur after using your toaster for several times.
PRODUCT OVERVIEW
4. Lower the toasting lever down vertically
until it is positioned in place. The toaster
will begin at once.
Tips: a) Only when the toaster is
connected to the mains power,
can the toasting lever be locked in
the downward position.
b) During the toasting process, you
may observe the toasting colour.
Press the CANCEL button to
cancel the operation at any time
if you are satisfied with the
colour.
5. Once the bread has been toasted to the
preset browning level, the toasting lever
will automatically pop up.
2. Put 1 or 2 slices of bread into the bread slots.
Tips: a) If toasting two slices, they should be similar in size, thickness and
freshness.
b) For optimum browning, always place the bread as close as possible to
the centre of the slots.
c) Make sure the crumb tray is completely inserted before use.
TOASTING BREAD
To prevent jamming do not use your toaster with
torn slices of bread. Make sure the size and
thickness of the slices of bread fit easily into the
toast slots. Always watch your toaster when in use.
Never leave your toaster unattended.
1. Unwind the mains cable from the bottom of the
toaster. Plug the mains plug into the mains
socket.
3. Select the level of browning by turning the Browning Control.
Tips: a) Select a lower position for light browning, especially for toasting only
one slice or for dry (old) bread. Note that the toasting colour for one
slice will be darker than that for two slices at the same level.
b) If you have already toasted some bread, the toaster elements will be
hot, so when you put some more bread into the toaster it may
become browner faster than the first slices that were toasted, even if
the Browning Control is set to the same level.
OTHER FUNCTIONS
Defrost
Insert the frozen bread. Set the browning control to
your desired colour. Lower the toasting lever down
until it remains in a downward position, then press
the DEFROST button. The indicator will illuminate. In
this mode, the frozen bread will be toasted to your
desired colour.
Reheat
Insert the cold slices of toast and lower the toasting
lever until it remains in a downward position. Press
the REHEAT button. The indicator will illuminate. In
this mode, setting the browning control will have no
effect as the toasting time is fixed. When the time
runs out, the toasting lever will automatically pop
up and finish the reheating process.
Cancel
If the toaster starts to smoke, press the CANCEL
button to stop toasting immediately. Remove all
protective wrapping prior to putting the bread into
the toaster. Avoid toasting the food with extremely
runny ingredients such as butter. The bread slot is
only applicable for toasting regular bread slices. Do
not toast irregular sized bread.
5. Lift the toasting lever to remove the blockage.
HOW TO CLEAR A PIECE OF BLOCKED BREAD
1. Remove the mains plug from the mains socket.
2. Allow the toaster to completely cool down.
3. Push and hold the toasting lever down then release.
4. Gently dislodge the blockage with a non-metallic object, for example the
handle of a wooden spoon.
CLEANING AND MAINTENANCE
Remove the mains plug from the mains socket and allow the toaster to cool
down before cleaning.
Do not use harsh cleaners or solvents as they may damage the casing.
The body of the toaster should be cleaned using a cloth dampened with warm
water and detergent. Make sure you do not allow water to seep into the
controls or heating elements.
When not in use, the mains cable may be wound under the bottom of the
toaster.
Ensure you don’t make contact with the heating elements, as you may
damage them.
Let the crumb tray dry thoroughly before reinserting it back into the
toaster. Ensure the crumb tray is completely inserted before using your
toaster again.
REMOVING CRUMBS FROM THE TOASTER
1. First remove the mains plug from the mains
socket.
2. Slide the crumb tray out by holding the
crumb tray handle. (The metal part may be
hot.)
3. Empty the crumbs into the bin and clean
the crumb tray.
Toast Slots
Toasting
Lever
Defrost
Button
Browning
Control
(Lower)
(Higher)
Darkest
Whitest
Reheat
Button
Cancel
Button
Crumb Tray
Crumb Tray
Handle
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
canc
el
defr
ost
rehea
t
