GB
32
FM Operation
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range
(87.50MHz). Or it will play the last FM station you were listening to.
3. To manually change the FM frequency, make sure no other order/
system setting is going on. Press
button to change the frequency
by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, press and hold
button. Your radio will skip forwards or backwards until it reached the
next available station.
The clock will be updated automatically if you can receive
DAB/FM signal in your location. In order to synchronize to the
current local time, you must leave it on the DAB/FM station for
a period of time.
Scan Setting
By default, FM scans stop at any available station. This may result in a poor
signal-to-noise ratio (hiss) from weak stations.
1. To change the scan settings to stop only at stations with good signal
strength, press MENU button, and then press
button to select
<Scan setting>, press button to confirm.
2. Press
button to browse <Strong stations only>, and then press
button to confirm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations,
this may result in a poor signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, and then press
button to select <Audio setting>, press button to confirm.
2. Press
button to browse <Forced mono>, and then press button
to confirm.
3. Refer to “Viewing Station Information” section to view station stereo/
mono information by selecting <Audio Info>.
