Sandstorm SSBT12, Instruction Manual

Page: 15 / 24

15
General Operation
• During STANDBY mode, the STANDBY indicator will light up red. Press the
STANDBY button on the main unit or the button on the remote control to turn the
unit on.
• Press the
STANDBY button to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.
• If there is no signal under any modes, or volume is muted, the unit will
automatically switch to standby mode in about 15 minutes.
Selecting Modes
Press the SOURCE button repeatedly to select the desired mode: AUX1 / AUX2 /
BLUETOOTH / COAXIAL / OPTICAL modes. Each mode’s LED indicator will light up blue to
show which mode is active.
Adjusting the Volume
Press the VOL + button to increase the volume.
Press the VOL – button to decrease the volume.
Pressing the volume buttons when the unit is Muted will restore sound.
EQ (Equaliser)
Press the EQ (Equaliser) button on the remote control to switch between preset equalisers
to suit individual preference.
Cycle through the preset equalisers to select the preferred sound ambience. Standard
settings (in no particular order) are Optimiser / Flat / Pop / Classic / Rock / Jazz.
SSBT12_IB_120911_Zell.indd 15 11/9/12 11:59 AM