manualshive.com logo in svg

S&S Worldwide W12348, Assembly Instructions, Page: 3 / 3

Share
Download
S&S Worldwide W12348 Assembly Instructions Download Page 3

6. Locate the 4 casters with threaded connections.  Insert a cast into the open end of 

the Handle End tubing.   Finger tighten, then use the included wrench to completely 

tighten.   Repeat with a 2

nd

 wheel. 

 

 

7.  Flip the cart over and insert and tighten wheels into the two open ends of the End 

Bar.   

 

8.  Flip cart onto its wheels and give yourself a pat on 

the back, your cart assembly is now complete.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W12348 Assembly Instructions  

 

S&S Worldwide   ssww.com 

 

 

Revision - Original 

Summary of Contents for W12348

Page 1: ...nings at the bottom of the grid of the Side Panel image 2 2 Find the Divider Panel and position it shown to the right With the divider panel positioned horizontally move it to the middle of the side panel panels The middle of the side panels is noted by having 2 steel wires about 1 apart Position the bottom hook beside the 2nd vertical wire on each side panel Then slide the panel into position suc...

Page 2: ...pressed side should face up Place a flat washer on top of each threaded rod and then a lock nut Tighten the lock nuts until they bottom out using a wrench or pliers Note that the wrench included with the hardware pack is for tightening the wheels and will not work for the lock nuts 5 Flip the cart over onto the opposite end Positon the Handle End over the 6 threaded rods add flat washers and lock ...

Page 3: ...use the included wrench to completely tighten Repeat with a 2nd wheel 7 Flip the cart over and insert and tighten wheels into the two open ends of the End Bar 8 Flip cart onto its wheels and give yourself a pat on the back your cart assembly is now complete W12348 Assembly Instructions S S Worldwide ssww com Revision Original ...

Reviews:

No comments