W12348 Split Equipment Cart Assembly Instructions
fdafdafads
1. Open box and remove all panels. Find the two large
panels shown above that will form the sides, top and
bottom of the cart. Stand those two panels on end
and next to each other as shown in the photo to the
right. The open ends of the bent wires that form the
hinges between the
panels will be on the
interior of the cart.
2. Slide the bent loops on
the Bottom panel of the
cart through the
openings at the bottom
of the grid of the Side
Panel. (image 2)
2. Find the Divider Panel and position it shown to the right. With
the divider panel positioned horizontally, move it to the middle of
the side panel panels. The middle of the side panels is noted by
having 2 steel wires about 1” apart. Position the bottom hook
beside the 2
nd
vertical wire on each side panel. Then slide the panel
into position such that each of the hooks on the divider panel slides
around a corresponding vertical wire in the side panels.
Bottom with Side Panel Attached
Split Top with Side Panel Attached
Divider Panel
Bottom Panel
Side Panel
Image 2
Bottom Hook
2
nd
Vertical Wire