background image

Declaration of Conformity

Signature of authorized person

Date of issue

Authorised Representative:

IDEX Pump Technologies 

R79 Shannon Industrial Estate

Shannon, Co. Clare, Ireland

Attn: Barry McMahon

Revision Level: F

Title

Director of Engineering

October 20, 2005

Date of revision

February 27, 2017

Manufacturer: Warren Rupp, Inc., 800 N. Main Street

Mansfield, Ohio, 44902 USA

 

Certifies that Air-Operated Double Diaphragm Pump Series: HDB, HDF, M Non-Metallic, 

S Non-Metallic, M Metallic, S Metallic, T Series, G Series, U Series, EH and SH High Pressure, 

RS Series, W Series, F Series, SMA and SPA Submersibles, and Tranquilizer

®

 Surge Suppressors comply with 

the European Community Directive 2006/42/EC on Machinery, according to Annex VIII. 

This product has used Harmonized Standard EN809:2012, Pumps and Pump Units 

for Liquids - Common Safety Requirements, to verify conformance.

5 - YEAR Limited Product Warranty

Warren Rupp, Inc. (“Warren Rupp”) warrants to the original end-use purchaser that no product sold by Warren Rupp that 

bears a Warren Rupp brand shall fail under normal use and service due to a defect in material or workmanship within five 

years from the date of shipment from Warren Rupp’s factory. Warren Rupp brands include Warren Rupp

®

,SANDPIPER

®

SANDPIPER Signature Series

TM

, MARATHON

®

, Porta-Pump

®

, SludgeMaster™ and Tranquilizer

®

.

The use of non-OEM replacement parts will void (or negate) agency certifications, including CE, ATEX, CSA, 3A and 

EC1935 compliance (Food Contact Materials). Warren Rupp, Inc. cannot ensure nor warrant non-OEM parts to meet the 

stringent requirements of the certifying agencies.

~ See sandpiperpump.com/content/warranty-certifications for complete warranty, 

including terms and conditions, limitations and exclusions. ~

6: W

ARRANTY

Summary of Contents for T20






















Reviews: