15
DE
10. FILTERWECHSEL
Die SILM Geräte werden mit einem F7 (ePM1 50%) Filter in der Zuluft sowie einem M5 (ePM10 50%) Filter in der Abluft
ausgeliefert. Eine Doppelfilterung im Gerät ist nicht möglich.
Der Filterwechsel kann von unten (10.1.) oder von der Seite aus (10.2.) erfolgen.
10.1. FILTERWECHSEL VON UNTEN
a) Öffnen Sie die Verschlüsse an der
Unterseite.
b) Drücken Sie die Halter beiseite um die Filterbox zu lösen.
The coils can be removed from the external modules through the lateral or the bo om. If the removal of the coils is expected to be
done through the bo om, C dimension can be 500 mm for all sizes.
10. FILTER REPLACEMENT
The heat recovery unit is supplied within a F7 filter in the supply side and M5 filter in the extract side. There is no possibility to
mount a second filter inside the unit.
The supplied filters can be removed both from bo om (1) and side (2):
10.1. REMOVING THE FILTER THROUGH THE BOTTOM
a) Open the specific hinged panel for filter replacement.
b) Push from the fixa on pieces to loose the filtra on box.
c) Remove the filtra on box.
d) Remove the filter from the filtra on box: first step is to push
from the pieces that fix the filter to the box. Then, the filter will
be liberated.
Do not threw the filtra on box away, you will need it to put
the spare filter inside the unit.
The coils can be removed from the external modules through the lateral or the bo om. If the removal of the coils is expected to be
done through the bo om, C dimension can be 500 mm for all sizes.
10. FILTER REPLACEMENT
The heat recovery unit is supplied within a F7 filter in the supply side and M5 filter in the extract side. There is no possibility to
mount a second filter inside the unit.
The supplied filters can be removed both from bo om (1) and side (2):
10.1. REMOVING THE FILTER THROUGH THE BOTTOM
a) Open the specific hinged panel for filter replacement.
b) Push from the fixa on pieces to loose the filtra on box.
c) Remove the filtra on box.
d) Remove the filter from the filtra on box: first step is to push
from the pieces that fix the filter to the box. Then, the filter will
be liberated.
Do not threw the filtra on box away, you will need it to put
the spare filter inside the unit.
c) Ziehen Sie die Filterbox heraus.
d) Lösen Sie die Filterkassette aus dem Rahmen.
The coils can be removed from the external modules through the lateral or the bo om. If the removal of the coils is expected to be
done through the bo om, C dimension can be 500 mm for all sizes.
10. FILTER REPLACEMENT
The heat recovery unit is supplied within a F7 filter in the supply side and M5 filter in the extract side. There is no possibility to
mount a second filter inside the unit.
The supplied filters can be removed both from bo om (1) and side (2):
10.1. REMOVING THE FILTER THROUGH THE BOTTOM
a) Open the specific hinged panel for filter replacement.
b) Push from the fixa on pieces to loose the filtra on box.
c) Remove the filtra on box.
d) Remove the filter from the filtra on box: first step is to push
from the pieces that fix the filter to the box. Then, the filter will
be liberated.
Do not threw the filtra on box away, you will need it to put
the spare filter inside the unit.
⚠
Schmeißen Sie den Rahmen nicht weg,
es wird nur der Filter getauscht.
The coils can be removed from the external modules through the lateral or the bo om. If the removal of the coils is expected to be
done through the bo om, C dimension can be 500 mm for all sizes.
10. FILTER REPLACEMENT
The heat recovery unit is supplied within a F7 filter in the supply side and M5 filter in the extract side. There is no possibility to
mount a second filter inside the unit.
The supplied filters can be removed both from bo om (1) and side (2):
10.1. REMOVING THE FILTER THROUGH THE BOTTOM
a) Open the specific hinged panel for filter replacement.
b) Push from the fixa on pieces to loose the filtra on box.
c) Remove the filtra on box.
d) Remove the filter from the filtra on box: first step is to push
from the pieces that fix the filter to the box. Then, the filter will
be liberated.
Do not threw the filtra on box away, you will need it to put
the spare filter inside the unit.
10.2. FILTERWECHSEL VON DER SEITE
a) Öffnen Sie den Deckel an der Seite.
b) Drücken Sie die Halter beiseite um die Filterbox zu lösen.
10.2. REMOVING THE FILTER THROUGH THE LATERAL
a) Remove the specific panel for filter replacement.
b) Push from the fixa on pieces.
c) Remove the filter. The filtra on box remains inside the unit.
11. RANGE SPECIFICATIONS
11.1. MAIN UNIT
*EXT: -10ºC @ 90%HR // INT: 20ºC @ 50%RH
SLIM 800
-
0,46
2,9
SL PH 800 2,2 M
2,66
12,9
SLIM 1200
-
0,91
4,1
SL PH 1200 3,0 M
3,91
17,9
SLIM 1600
-
0,93
3,7
SL PH 1600 6,0 T
6,93
12,8
SLIM 2000
-
0,97
4,5
SL PH 2000 7,5 T
8,47
15,9
Model
Heat
exchanger
efficiency*
Max. abs.
power (W)
Max. Current
(A)
800
86%
1/230V, 50Hz
Electrical pre-heater
(optional)
Power supply
Nominal
airflow (m3/h)
2000
88%
3/400V, 50Hz
1200
86%
1/230V, 50Hz
1600
87%
3/400V, 50Hz
11.2. EXTERNAL BATTERIES
In this sec on the technical characteris cs of the preheater and post-treatment modules are described. For further details see
sec ons: “7.2. EXTERNAL MODULES DIMENSIONS”, “27. INSTALLATION AND CONTROL OF EXTERNAL BATTERIES” and “28.
INSTALLATION AND CONTROL OF ELECTRICAL PREHEATER”.
10.2. REMOVING THE FILTER THROUGH THE LATERAL
a) Remove the specific panel for filter replacement.
b) Push from the fixa on pieces.
c) Remove the filter. The filtra on box remains inside the unit.
11. RANGE SPECIFICATIONS
11.1. MAIN UNIT
*EXT: -10ºC @ 90%HR // INT: 20ºC @ 50%RH
SLIM 800
-
0,46
2,9
SL PH 800 2,2 M
2,66
12,9
SLIM 1200
-
0,91
4,1
SL PH 1200 3,0 M
3,91
17,9
SLIM 1600
-
0,93
3,7
SL PH 1600 6,0 T
6,93
12,8
SLIM 2000
-
0,97
4,5
SL PH 2000 7,5 T
8,47
15,9
Model
Heat
exchanger
efficiency*
Max. abs.
power (W)
Max. Current
(A)
800
86%
1/230V, 50Hz
Electrical pre-heater
(optional)
Power supply
Nominal
airflow (m3/h)
2000
88%
3/400V, 50Hz
1200
86%
1/230V, 50Hz
1600
87%
3/400V, 50Hz
11.2. EXTERNAL BATTERIES
In this sec on the technical characteris cs of the preheater and post-treatment modules are described. For further details see
sec ons: “7.2. EXTERNAL MODULES DIMENSIONS”, “27. INSTALLATION AND CONTROL OF EXTERNAL BATTERIES” and “28.
INSTALLATION AND CONTROL OF ELECTRICAL PREHEATER”.
c) Ziehen Sie die Filterbox heraus, die Filterbox bleibt dabei im Gerät.
10.2. REMOVING THE FILTER THROUGH THE LATERAL
a) Remove the specific panel for filter replacement.
b) Push from the fixa on pieces.
c) Remove the filter. The filtra on box remains inside the unit.
11. RANGE SPECIFICATIONS
11.1. MAIN UNIT
*EXT: -10ºC @ 90%HR // INT: 20ºC @ 50%RH
SLIM 800
-
0,46
2,9
SL PH 800 2,2 M
2,66
12,9
SLIM 1200
-
0,91
4,1
SL PH 1200 3,0 M
3,91
17,9
SLIM 1600
-
0,93
3,7
SL PH 1600 6,0 T
6,93
12,8
SLIM 2000
-
0,97
4,5
SL PH 2000 7,5 T
8,47
15,9
Model
Heat
exchanger
efficiency*
Max. abs.
power (W)
Max. Current
(A)
800
86%
1/230V, 50Hz
Electrical pre-heater
(optional)
Power supply
Nominal
airflow (m3/h)
2000
88%
3/400V, 50Hz
1200
86%
1/230V, 50Hz
1600
87%
3/400V, 50Hz
11.2. EXTERNAL BATTERIES
In this sec on the technical characteris cs of the preheater and post-treatment modules are described. For further details see
sec ons: “7.2. EXTERNAL MODULES DIMENSIONS”, “27. INSTALLATION AND CONTROL OF EXTERNAL BATTERIES” and “28.
INSTALLATION AND CONTROL OF ELECTRICAL PREHEATER”.
Summary of Contents for SLIM 800
Page 1: ...SLIM DE...
