S&P MDX-ES24VK Installation, Operation And Maintenance Manual Download Page 7

5

Airflow / Air Velocity Reference Table

Airflow 

(CFM)

Duct Size (in)

4

5

6

8

Air Velocity (FPM)

30

344

220

153

86

40

458

293

204

115

50

573

367

255

143

60

688

440

306

172

70

802

513

357

201

80

917

587

407

229

90

1031

660

458

258

100

1146

733

509

286

110

1261

807

560

315

120

1375

880

611

344

130

1490

953

662

372

140

1604

1027

713

401

150

1719

1100

764

430

160

1833

1173

815

458

170

1948

1247

866

487

180

2063

1320

917

516

190

2177

1393

968

544

200

2292

1467

1019

573

Note, if the Actual Measured CFM is not enough, the installer may need to increase the duct size or add a booster fan if necessary. Ensure there is no blockage 
in the ductwork first.

 

MAINTENANCE

CAUTION: BEFORE CARRYING OUT ANY MAINTENANCE OR SERVICING, ENSURE THE UNIT IS 
DISCONNECTED FROM THE MAIN ELECTRICAL SUPPLY.

S&P recommends inspection of the Motorized Damper and ES24V at least once every twelve (12) months. To inspect 
the unit disconnect from electrical supply. Remove the motorized damper from the fresh air ductwork and inspect the 
damper blade for damage and proper function. If any debris is evident on the damper blade clean with a damp (not 
wet) cloth. DO NOT USE any detergents or abrasive materials for cleaning. Reinstall motorized damper to the fresh 
air ductwork and reseal joints. 

WARRANT Y

S&P USA - S&P Canada warrant that the MDX-ES24VK will be free from defective materials and workmanship for 
the period of (5) years from the date of original purchase. In the event that we find any part is defective the product 
will be repaired or, in the Company’s discretion, replaced without charge provided that the product has been installed 
in accordance with the enclosed instructions and all applicable EPA Standards and state and local building codes.
an such as: Improper Maintenance; Misuse; Negligence; Alteration; Abuse; Abnormal Use; or Accident or Incorrect 
Electrical Voltage and Current. 

Please visit SolerPalau-USA.com/sp-form/claims.html for additional details about warranty procedures.

 

Summary of Contents for MDX-ES24VK











Reviews: