IMPORTANT SAFETY NOTES
Remove all packing material and, to prevent any chocking, do not allow children playing with it.
The device shall be used indoors and protected from the elements, only.
The device shall not be used by people (children included) with reduced physical or mental
capacities, or without any experience or knowledge, unless they are under the supervision of a
person responsible for their safety or they have been instructed on how to use the device.
The device shall be kept out of the reach of children.
Children shall be watched over to make sure they do not play with the device.
Connect the adapter to a wall outlet protected from moisture and water, don’t use extension
cables.
If there is the need of extension cables, buy Sandokan art. 7358, which is equivalent to 10 me-
ters of extension cable at low voltage. ATTENTION: maximum 3 extension cables for device.
The device shall not be used in dusty areas, or with flammable or explosive vapours.
Do not use the device if it shows signs of breaks.
Do not use the device if it is wet or shows signs of moisture.
Never expose the device to rain, do not forget it outdoors, and do not expose it to very dirty
environments.
The water jet of a garden pipe on the device may result in an electric shock.
Not suitable for use inside barns, stables, or similar.
Prevent cable or plug from touching hot surfaces.
Should the power cable be damaged, have it replaced by the manufacturer or by the authorized
technical service or, anyway, by a qualified operator, so as to prevent any possible risk.
If one of device parts is damaged, do not fix it by yourself, but contact an authorised service
centre.
Unplug the device when not in use.
Place it on furniture, shelves or on the floor, and always on horizontal surfaces.
Always make sure to leave enough room around the MOSQUIT ALL to ensure a correct air
circulation.
The appliance must be used only with the power adapter supplied with the product and must
be operated only at very low voltage (12 volts DC).
This device is suitable for its intended use, only. The manufacturer will not be liable for any
damage resulting from device misuse.
- Empty the base of device making sure that the filter is clean so as to allow air correct
circulation.
- Clean fan blades using a small brush (or a small paintbrush).
- Lock the base of the device back in place turning it clockwise
- Connect the device at the power mains to reactivate the trap
ATTENTION! TO CLEAN THE DEVICE, DO NOT DIP IT IN WATER
