Basic Usage
8
Reset
If the Sansa
®
Clip+ MP3 player freezes up for any reasons, press the
Power
button
and hold it for approximately 15 seconds. This is similar a power down of the player.
However, be aware that once you perform the reset, any adjustments you made
during the last operation will be lost.
Connecting to your Computer
To connect the Sansa
®
player to your PC, follow these instructions:
1.
Connect the larger end of the USB cable into an available USB port on the PC.
2.
Connect the smaller end of the USB cable into the dock connector of the player.
3.
The player will show “Connected” on its display screen.
4.
The player will appear in
My Computer
as Sansa Clip+. (In Mac OS, the player will
appear on your desktop as a removable disk named
SANSA CLIPP
.)
NOTE: For Mac OS, the Clip+ player must be set to
Auto Detect
or
MSC
mode in the
USB Mode
settings. See Section 9 – Settings for more details.
Auto Detect or MTP mode
Summary of Contents for SDMX18R-002GK-A57 - Sansa Clip+ 2 GB Digital...
Page 18: ...Loading Contents 15...
