LED Behavior
System Condition
Solid Light - no blinking
Data Transfer from a USB connected device
Slow "breathing" rhythm
Powering Up or Initializing
Slow "breathing" rhythm
Reset Button Pressed
Slow "breathing" rhythm
Device Shutdown Sequence Activated Through Mobile App
Fast "breathing" rhythm
Device Requires Attention - Device Encountered an Error
Fast "breathing" rhythm
USB Device Connection Error
Fast "breathing" rhythm
Ethernet Connection Not Available
"Heartbeat" rhythm
File System Notification - Check if rebuild is needed - May require
technical support.
"Rapid Blinking" rhythm
Image Recovery Mode - Device is rebuilding from an unexpected
action; this process will take some time. May require technical
support.
LED Table Note:
Sometimes different 'System Conditions' result in identical
"LED Behavior". Therefore, view each "LED Behavior" within the context of
your operation.
Rear Layout
ibi includes these buttons, ports and connectors, where applicable.
1.
Reset Button
2. USB Port(s)
3. DC Power Connector
Reset Button
On the underside of your device, there is a Reset Button. This is a tiny recessed
button that requires something similar to the pointy end of a paper clip to be
pressed.
Table 1.4
Reset Button
Function
Device Operation
Press for 1 to
29 seconds
During this function the ibi device will reboot, momentarily making it
inaccessible. This process does not delete data.
Press for 30 to
50 seconds
This function will demote the Device Owner to a Device User in order to
change ownership of the ibi device. This does not delete data and each user
still has access to their data. However, when this process occurs, the next user
to go through the setup process on the device becomes the device owner.
The remaining users on the device are unchanged.
Press for at
least 60
seconds
Caution!
This process will delete all data, all Device Users and the Device
Owner. The unit will be reset to factory default settings and will need to be set
up using your mobile device. A new Device Owner will be set when the next
person sets up the device. Reset has completed once the LED has gone
through a period of rapid blinking and returned to a state of solid white.
Your ibi Device
ibi
User Manual
4
