STR-1000 User Guide
Sandia Research Corporation
Page
6
of
17
Figure 4. Battery latch.
When fully seated on the radio, locking latches are engaged to the radio body to hold the battery
in place. Use the attached key to tighten the latch. To remove the battery (usually not needed),
use the attached key to loosen the latch and then move it off of the mating part on the battery
box.
The battery is charged by attaching the 19 pin circular connector to the radio Charge/Data port
on the lower right portion of the front panel. The charger itself is plugged into a standard 120
volt AC outlet. The charging time for a fully discharged battery will be up to 16 hours. The
charger will automatically go to a standby mode when charging is complete. When plugged into
the AC outlet the charger will display a green light in the upper right corner. During the
charging phase, the charger will display a yellow light in the Output graphic on the charger. See
Figure 5.
Figure 5. Charger and charger plugged into radio 19 pin Charge port.
