13
3700 Osuna Road NE
Suite 711
Albuquerque, NM 87109
www.sandia.aero
Figure 5 - Wiring Diagram
3.6
Unit Mounting
1.
The unit connects to the mounting bracket utilizing two upper tabs and a lower fastener.
2.
Place gasket on unit before installing unit onto bracket.
3.
The unit is installed by engaging the two upper tabs first, then securing the bottom screw.
4.
Hold the unit at a slight angle off of the instrument panel (as shown below) and align the upper
tabs with the slots on the rear of the unit.
