SANDENVENDO AMERICA INC
1188858N ECN 56775
9
CLEANING
Prior to cleaning, insure the HFD is off, and allow the HFD to cool.
Keep HFD clean for optimal performance. Do not place dirty pans on hot plate surfaces. Clean pans
thoroughly prior to placing food on pans, or use paper liner on pans. Keep area around unit clean and
clear.
Do not use abrasive materials on hot plates or glass. Use only mild soap and water or nonabrasive
cleaners with a soft cloth or sponge, then wipe dry.
To remove the rear sliding doors (HFD only): by lift the door up from bottom track and pull bottom of door
out. Installation is reverse.
Remove the rear sliding door tracks by lifting at one edge. Tracks are flexible for ease of installation and
removal. Clean food particles from door tracks. Clean surface under door tracks also.
Once the rear doors are removed, clean inside the HFD. Wipe off any food particles from all shelves,
gaskets and glass.
Clean glass and gaskets around door assembly. Clean front of shelves and point of sales displays. Clean
outside of unit with a damp cloth and wipe dry.
To open front glass (HFD model only):
Reach fingers under the front edge of the
glass.
Squeeze the two hidden latches and pull
the door open.
To close:
Push on the lower metal
frame until the latches click.
