S&C TripSaver II Operation Manual Download Page 3

S&C Instruction Sheet 461-507    3

 Safety Information

Understanding  

Safety-Alert 

Messages

Several types of safety-alert messages may appear throughout this instruction sheet and 
on labels and tags attached to your TripSaver II Cutout-Mounted Recloser. Familiarize 
yourself with these types of messages and the importance of these various signal words: 

 DANGER

“DANGER” identifies the most serious and immediate hazards that will likely result in 
serious personal injury or death if instructions, including recommended precautions, 
are not followed .

 WARNING

“WARNING” identifies hazards or unsafe practices that can result in serious personal 
injury or death if instructions, including recommended precautions, are not followed .

 CAUTION

“CAUTION” identifies hazards or unsafe practices that can result in minor personal 
injury if instructions, including recommended precautions, are not followed .

NOTICE

“NOTICE” identifies important procedures or requirements that can result in product 
or property damage if instructions are not followed .

Following Safety 

Instructions

If you do not understand any portion of this instruction sheet and need assistance, contact 
your nearest S&C Sales Office or S&C Authorized Distributor. Their telephone numbers 
are listed on S&C’s website 

sandc.com

, or call the S&C Global Support and Monitoring 

Center at 1-888-762-1100.

NOTICE

Read this instruction sheet thoroughly and carefully 
before installing your TripSaver II Cutout-Mounted 
Recloser and the magnet tool . 

Replacement 

Instructions  

and Labels

If additional copies of this instruction sheet are needed, contact your nearest S&C Sales 
Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.

It is important that any missing, damaged, or faded labels on the equipment be replaced 

immediately. Replacement labels are available by contacting your nearest S&C Sales 
Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.

Summary of Contents for TripSaver II












Reviews: