2
S&C Instruction Sheet 1075-500
Qualified Persons
WARNING
The equipment covered by this publication must be installed, operated, and maintained
by qualified persons who are knowledgeable in the installation, operation, and main-
tenance of radios in electric power distribution equipment, along with the associated
hazards . A qualified person is a radio technician who is qualified to install transmission-
power-limited radio equipment per FCC Part 90, and who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive
parts of electrical equipment .
• The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the qualified person will be exposed .
• The proper use of the special precautionary techniques, personal protective equip-
ment, insulating and shielding materials, and insulated tools for working on or near
exposed energized parts of electrical equipment .
These instructions are intended only for such qualified persons . They are not intended
to be a substitute for adequate training and experience in safety procedures for this type
of equipment .
Read this
Instruction Sheet
Thoroughly and carefully read this instruction sheet before installing or operating your
S&C SpeedNet SDR Software Defined Radio.
The latest version is available online in
PDF format at
sandc.com/Support/Product-Literature.asp
.
Retain this
Instruction Sheet
This instruction sheet should be available for reference wherever the
SpeedNet SDR
Software Defined Radio
is to be used. Retain this instruction sheet in a location where
you can easily retrieve and refer to it.
Proper Application
CAUTION
The equipment in this publication must be selected for a specific application . The
application must be within the ratings furnished for the equipment .
Warranty
The standard warranty contained in seller’s standard conditions of sale, as set forth in
Price Sheets 150 and 155, applies to S&C SpeedNet SDR Software Defined Radios, except
that the first paragraph of said warranty is replaced by the following:
(1)
General:
Seller warrants to purchaser for a period of two years from the date of
shipment that the equipment delivered will be of the kind and quality specified in
the contract description and will be free of defects of workmanship and material.
Should any failure to conform to this warranty appear under proper and normal use
within two years after the date of shipment the seller agrees, upon prompt notifica-
tion thereof and confirmation that the equipment has been stored, installed, oper-
ated, inspected, and maintained in accordance with recommendations of the seller
and standard industry practice, to correct the nonconformity either by repairing any
damaged or defective parts of the equipment or (at seller’s option) by shipment of
necessary replacement parts.
The above special warranty does not apply to ateway communication devices applied
with SpeedNet SDR Software Defined Radios.
End user is granted a nontransferable, non-sublicensable, nonexclusive license to
use the software furnished with
SpeedNet SDR Software Defined Radios
only upon
acceptance of all the terms and conditions of the seller’s end user license agreement set
forth in Price Sheet 155.
Introduction
