2
S&C Instruction Sheet 775-510
Introduction
Qualified Persons
WARNING
Only qualified persons who are knowledgeable in the installation, operation, and
maintenance of overhead and underground electric distribution equipment, along
with all associated hazards, may install, operate, and maintain the equipment
covered by this publication . A qualified person is someone who is trained and com-
petent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive
parts of electrical equipment
• The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the qualified person will be exposed
• The proper use of special precautionary techniques, personal protective
equipment, insulated and shielding materials, and insulated tools for working on
or near exposed energized parts of electrical equipment
These instructions are intended ONLY for such qualified persons . They are
not intended to be a substitute for adequate training and experience in safety
procedures for this type of equipment .
Read this
Instruction Sheet
NOTICE
Thoroughly and carefully read this instruction sheet and all materials included in
the product’s S&C Instruction Handbook before installing or operating an S&C
Scada-Mate SD Switching System . Familiarize yourself with the Safety Information
and Safety Precautions on pages 3 through 5 . The latest version of this publication
is available online in PDF format at
sandc.com/en/support/product-literature/ .
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your S&C Scada-Mate SD Switching System.
Designate a location where you can easily retrieve and refer to this publication.
Proper Application
WARNING
The equipment in this publication is only intended for a specific application .
The application must be within the ratings furnished for the equipment . Ratings
for the S&C Scada-Mate SD Switching System are listed in the ratings table in
Specification Bulletin 775-31 . The ratings are also on the nameplate affixed to the
product .
Warranty
The warranty and/or obligations described in S&C’s Price Sheet 150, “Standard Conditions
of Sale – Immediate Purchasers in the United States” (or Price Sheet 153, “Standard
Conditions of Sale – Immediate Purchasers Outside the United States”), plus any special
warranty provisions, as set forth in the applicable product-line specification bulletin,
are exclusive. The remedies provided in the former for breach of these warranties shall
constitute the immediate purchaser’s or end user’s exclusive remedy and a fulfillment of
the seller’s entire liability. In no event shall the seller’s liability to the immediate purchaser
or end user exceed the price of the specific product that gives rise to the immediate
purchaser’s or end user’s claim. All other warranties, whether express or implied or
arising by operation of law, course of dealing, usage of trade or otherwise, are excluded.
The only warranties are those stated in Price Sheet 150 (or Price Sheet 153), and THERE
ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. ANY EXPRESS WARRANTY OR OTHER OBLIGATION
PROVIDED IN PRICE SHEET 150 (OR PRICE SHEET 153) IS GRANTED ONLY TO THE
IMMEDIATE PURCHASER AND END USER, AS DEFINED THEREIN. OTHER THAN AN
END USER, NO REMOTE PURCHASER MAY RELY ON ANY AFFIRMATION OF FACT OR
PROMISE THAT RELATES TO THE GOODS DESCRIBED HEREIN, ANY DESCRIPTION
THAT RELATES TO THE GOODS, OR ANY REMEDIAL PROMISE INCLUDED IN PRICE
SHEET 150 (or PRICE SHEET 153.)