S&C Instruction Sheet 653- 502
13
Safety Precautions
1.
QUALIFIED PERSONS. Access to the PureWave UPS
System must be restricted only to qualified persons. See
“Qualified Persons” on page 2.
2.
SAFETY PROCEDURES. Always follow safe operating
procedures and rules.
3.
PERSONAL PROTECTIVE EQUIPMENT. Always use
suitable protective equipment, such as rubber gloves,
rubber mats, hard hats, safety glasses, and flash
clothing, in accordance with safe operating procedures
and rules.
4.
SAFETY LABELS. Do not remove or obscure any of
the “DANGER,” “WARNING,” “CAUTION,” or “
NOTICE
”
labels.
5.
OPERATING MECHANISM AND BASE. The PureWave
UPS System contains fast-moving parts that can
severely injure fingers. Do not remove or disassemble
operating mechanism or circuit breakers or remove
access panels on the PureWave UPS System unless
directed by S&C Electric Company.
6.
ENERGIZED COMPONENTS. Always consider all parts
live until de-energized, tested, and grounded.
7.
GROUNDING.
For grounding purposes, the proceeding must be
followed:
• The PureWave UPS System PCS base must be
connected to a suitable earth ground or to a suitable
building ground for testing before energizing the unit
and at all times when energized.
8.
MAINTAINING PROPER CLEARANCE. Always
maintain proper clearance from energized components.
DANGER
The S&C PureWave UPS System operates at high ac and dc voltages. Failure to
observe these precautions will result in serious personal injury or death.
Some of these precautions may differ from your company’s operating procedures and
rules. Where a discrepancy exists, follow your company’s operating procedures and rules.
Inspection
After the PureWave UPS System is commissioned and the unit is online, inspection and
maintenance should be scheduled on a regular basis to ensure proper system operation
.
Shipping and Handling
