712-502 2
INTRODUCTION
Operating
Considerations
Ç
CAUTION
The equipment covered by this publication must be selected for a specifi c application and
it must be installed, operated, and maintained by qualifi ed persons who are thoroughly
trained and who understand any hazards that may be involved. This publication is written
only for such qualifi ed persons and is not intended to be a substitute for adequate training
and experience in safety procedures for this type of equipment.
Qualified Persons
Ç
WARNING
The equipment covered by this publication must be installed, operated, and maintained by
qualifi ed persons who are knowledgeable in the installation, operation, and maintenance
of substation electric power distribution equipment along with the associated hazards.
A qualifi ed person is one who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from non-live
parts of electrical equipment.
• The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the qualifi ed person will be exposed.
• The proper use of the special precautionary techniques, personal protective equip-
ment, insulating and shielding materials, and insulated tools for working on or near
exposed energized parts of electrical equipment.
These instructions are intended only for such qualifi ed persons. They are
not
intended
to be a substitute for adequate training and experience in safety procedures for this
type of equipment.
Read this
Instruction Sheet
Read this instruction sheet before installing or operating your S&C Circuit-Switcher
—Mark VI. Familiarize yourself with “SAFETY INFORMATION” on pages 4 through 5.
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your S&C Circuit-Switcher—Mark VI. These
instructions should be stored in the Mark VI CS-1A Switch Operator instruction manual
holder on the operator door.
