2
ENGLISH
1 Introduction
Just like any other wireless mouse, Sandberg
Wireless Battery-Free Mouse Pro (referred to as
"the mouse") gives you full freedom of
movement without an annoying cable in the
mouse. But this mouse is different from the rest.
It runs without batteries! This means you are
completely free from annoying battery changes
which are both time-consuming and cost money
as well as causing damage to the environment.
The secret is the mouse mat from which the
mouse draws electricity via electromagnetic
induction through the computer’s USB port. The
mouse’s optical controls ensure optimal precision
and the two scroll wheels allow you to scroll
both vertically and horizontally. Software is also
included in which you can programme the
mouse’s buttons and fine-tune movement.
2 Overview
Figure 1
The overview shows the standard configuration.
When installing the program in iWheelZoom
(section 3.2) you can change the configuration
according to your requirements.
3 Installation
3.1 Installing the mouse
Put the mouse on the mouse pad and connect
it to a USB port while the computer is on. The
mouse is then installed automatically. It may be
necessary to press the button ”Tune” to activate
the mouse.
There are two LEDs on the round control unit.
The red “PWR” LED is always on. The green
“RUN” LED lights up when the mouse is moved.
3.2 Installation and using the programme in
Wheel Zoom
The mouse has basic functions without installing
the supplied program in iWheelZoom. However,
if you install it you can programme the mouse
according to your requirements.
If you have Windows Vista or Windows 7, you
need to know whether you have a 32 or a 64 bit
version. You can check by right-clicking
“Computer” as shown in figure 2.
Figure 2
NOTE: You must uninstall any other mouse
software before you install iWheelZoom to avoid
any conflicts.
Right click
Doubleclick
Horizontal
and vertical
scroll wheel
Forward
Back
Left click
