Insert the Vent Hose
(I)
with the two #16 Hose Clamps
(Q)
into the oil canister and Intake Tube
(C)
. Tighten all hose
clamps.
Tool Required:
1/4”,
5/16” Nut Driver or Flat Blade Screw
Driver..
17
16
15
14
12
Press the Lid Seal
(R)
into the groove on top of the Air Box
(A)
.
Remove the protective covering on the Clear Lid
(B)
.
Place the Clear Lid
(B)
on top of the Air Box
(A)
and secure
with the 10-24 Screws
(L)
and Lid Washers
(K)
.
Tool Required:
Screwdriver
Remove the filter minder from the stock intake box and
insert it into the Intake Tube
(C)
.
Install the Air Filter
(E)
onto the Intake Tube
(C)
and tighten
the #88 Hose Clamp
(O)
.
Tool Required:
5/16” Nut Driver or Flat Blade Screw
Driver..
13
7
INSTALLATION STEPS:
