• 8mm, 10mm, 12mm Wrench/Socket
• Phillips Screwdriver
• Adjustable Wrench
• Panel Removal Tool
• Pliers
TOOLS REQUIRED:
• Cleanable (KF-1053). If the enclosed filter is Red, it came preoiled from the factory. Please visit www.sbfilters.com
for exact oil amount required after cleaning.
• Disposable (KF-1053D). If the enclosed filter is White, it is a disposable filter and should be discarded once it reaches
capacity. This filter
does not require oil
. For more info on S&B’s disposable filter, visit www.sbfilters.com.
S&B FILTER MAINTENANCE:
• Please read the entire product guide before proceeding.
• Ensure all components listed on pages 3 & 4 are present.
• If you are missing any of the components, call our customer support at (909) 947-0015.
• Do not work on your vehicle while engine is hot.
• Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.
BEFORE YOU START
Kit may not fit with the following Aftermarket
Parts installed:
• Body Lift or Lowering Kit
• Custom Hood
• Throttle Body Spacer/ Upgrade
NOTES:
Product will be submitted to Air Resources
Board for approval shortly.
Not Legal for use in CA or other states
adopting CA emissions standards”
See Page 2 for more info.
CARB STATUS - PENDING
for purchasing your new S&B Filters intake kit. If at any time you need additional assistance with installation or have any
other questions or comments, feel free to call our customer service department at 909-947-0015. You can also take advantage of our live chat
at www.sbfilters.com and connect with an S&B representative immediately. We hope you enjoy your new S&B Filters product and thank you
for your continued support. Breathe Easy. Your Engine and Warranty Are Protected.
Thank You!
2012 - 2015
Toyota
Tacoma
4.0L
APPROX. INSTALL TIME:
1HRS | 00MIN
YEAR:
MAKE:
MODEL:
ENGINE:
1
VEHICLE APPLICATION:
