TY-JS-211220-00
9
9
IV. Installation
1. Open the package and check whether the machine is in good
condition and whether the accessories are complete.
2. Please ensure that the working voltage of the chiller is stable and
normal.
Because the refrigeration compressor is sensitive to the power supply voltage, the normal
working voltage of our company's standard products is 210~240V (110V model is
100~120V). If wider operating voltage range is necessary, customization is available.
3. Equipment installation conditions and requirements.
(1) It must be installed on a horizontal surface and not tilted.
(2)The air outlet of the chiller should be at least 1.5m away from the obstacle, and the air
inlet must be at least 1m away from the obstacle (See below diagram).
(3) Do not install in harsh environments such as corrosive, flammable gas, dust, oil mist,
conductive dust, high temperature and humidity, strong magnetic field, direct sunlight, etc.
(4) Operating Environment
Ambient Temperature
Ambient Humidity
Altitude
0~45
℃
≤90%RH
≤3,000m
(5) Medium Requirements
Cooling medium allowed by the chiller includes purified water, distilled water, high-
purity water and other softened water. It is forbidden to use oily liquids, liquids containing
solid particles, corrosive liquids, etc. Clean the filter element and replace the cooling
water regularly (about three months is recommended) to ensure the normal operation of
the chiller.
When the chiller is stored with water at room temperature lower than 2
℃
, it is
necessary to add anti-freezer in the chiller water tank. It is recommended to use
antifreeze with a concentration of not more than 30% containing ethylene glycol or
propylene glycol. After the temperature warms up, change to purified water, distilled water
or other suggested cooling media, let the chiller run for 30 minutes to remove the residual
anti-freezer and drain it, and then refill with unused circulating water.
