WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS
OPENED. HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING
YOUR SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE
TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND
SURROUNDING STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY,
SECURITY AND WARRANTY OF THE SAFE.
13. SECURING YOUR SAFE
TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE
DRILL / HAMMER DRILL
DRILL BIT – 3/16” ( for installing into concrete with provided hardware)
WRENCH- 7/16 ” (10MM) SOCKET
HAMMER
10
Use the hardware provided or consult your hardware retailer for fastening
hardware for your particular mounting surface.
Open your safe door to provide access to the factory drilled bolt down holes.
To secure your safe to the floor it will first be necessary to drill pilot holes in
the floor surface.
Drill the appropriate diameter and depth of pilot holes based on the type of
hardware being used and the type of floor surface. For the hardware provided
(concrete floor installation) we recommend using a hammer drill and 3/16”
concrete drill bit to drill the four corresponding holes in the concrete floor.
Secure the safe by threading the 4 provided anchor bolts through the factory
drilled mounting holes (2 on the back and 2 on the floor). Secure and ratchet
down tight.
1.
2.
3.
4.
5.
