![Sanctuary SA-DIA4 Instruction Manual Download Page 10](http://html1.mh-extra.com/html/sanctuary/sa-dia4/sa-dia4_instruction-manual_4643714010.webp)
9. LOCKOUT MODE / TAMPER PROTECTION
8. LOW BATTERY WARNING
Red & Green = Low Battery
This safe is equipped to alert you of Low
Battery Mode. This Low Battery Warning is
initiated immediately after a successful code
entry. The keypad will illuminate both the red
and green LED lights for 3 seconds. It is highly
advised to immediately replace the safe's
batteries to avoid being locked out of your safe.
9
7. INTERNAL LIGHTING
When the safe door is opened,
internal lighting activates for 30
seconds.
If you need to activate your light
longer, you can press the green light
activation button on the inner door
panel. This will activate the internal
lighting for an additional 30 seconds
each time it is pressed.
Internal Light
Light Activation
Button
1. Three consecutive rejected security code entries puts
the safe in “Basic Lockout” mode. The keypad is
deactivated for 30 seconds.
2. Six consecutive rejected security code entries results
in “Severe Lockout” mode. The keypad is deactivated
for 5 minutes.
Note: During lockout mode, the yellow LED will light up once
every 10 seconds. When lockout mode has ended, the
green LED will flash 1 time and you will hear 1 beep to
signify the lockout mode has ended. You will now have
access to your keypad.
3. After the safe enters basic or severe lockout mode, the tamper indicator will trigger
to warn you that someone has unsuccessfully attempted to gain access to your safe.
This tamper indicator will signal immediately after the next successful code is entered.
The yellow LED will flash 3 times and in addition to a 3 second long beep.