20
※
01
02
03
04
05
06
Disassembly and cleaning
After the motor has completely stopped, unplug
the power cord with dry hands.
Remove the chamber set from the main body.
Twist the hopper to open and lift up in order to
disassemble the unit.
Use a cleaning brush and wash the chamber set
under running water.
Open the discharge chute and juice cap, and
remove all seals.
Wipe down the main body with a dry towel or
soft cloth. Put juicing parts on a towel to dry.
Wash seals separately and allow to dry before
reinserting them.
For deep cleaning and sterilization, soak juicing
parts in a mixture of water, baking soda, and
either vinegar or citric acid.
※
If the juicer is not cleaned immediately after use, pulp can dry and stick to the juicing parts. This can reduce
performance and make cleaning difficult. Do not clean it with hot or boiling water, abrasive sponges, solvents, or
sharp cleaning tools. Do not wash in a dishwasher.
