San Telequip (P) Ltd.,
504 & 505 Deron Heights, Baner Road
Pune 411045, India
Phone
: +91-20-27273455, 9764027070, 8390069393 Connecting. Converting. Leading!
:
.
supplied. Terminal Block 2 wires power supply is an option.
DC Power outlet
Reset Button(Wi-Fi)
If any chance you forgot the login password, or have incorrect settings making Gateway inoperable.
When the power is on and the “SYS” LED light on, use a point tip to press this button and hold it and
wait for more than 25 seconds. All the parameters will be reset to the factory default.
LED Indicators
PWR (Red)
:
After power on, this LED is always On.
SYS (Green) :
After power on and system working, this LED start blinking
Wi-Fi (Red)
:
LED is ON after power on, then off a while. It starts blinking after Wi-Fi module is
ON
TX TX/ RX
(Green/Green)
:
Upon data sending or receiving indicator, the LED will blink.
Wiring Architecture
RS232 Wiring
RS-422 Wiring
