San Telequip Private Limited.,
504 & 505 Deron Heights, Baner Road
Pune 411045, India
Phone
: +91-20-27273455, 9764027070, 8390069393 Connecting. Converting. Leading!
User Manual for 4 Ports Serial to Ethernet Converter,Model Number SC10E4IK
Introduction
SC10E4IK 4-Ports Serial to Ethernet Converter providing new
ways of connecting serial devices to a Wireless LAN (Wi-Fi
802.11 b/g/n ). This converter is designed to operate 4 serial
ports through wireless (Wi-Fi 802.11 b/g/n) over 10/100Mbps
Ethernet network.. 4 Serial ports operate in common RS-232,
RS-422 and RS-485 auto selection modes configuration.
SC10E4IM K provides TCP Server Mode, TCP Client Mode, and
UDP Mode for selection. It supports manual configuration via
web browser and support various protocols including TCP, IP, UDP, HTTP, DHCP, ICMP, and ARP. These
are the best solution to coordinate your Serial interface devices.
Product Specifications
System
CPU
: MT7688AN MIPS CPU, 580 MHz
RAM
: 128M Bytes DDR2 RAM
ROM
: 32M Bytes Flash ROM
OS
: Open Wrt Linux OS
Ethernet
Port Type
: RJ-45 Connector
Speed
: 10 /100 M bps (Auto Detecting)
Protocol : ARP, IP, ICMP, TCP, HTTP, DHCP,DNS,NTP
Mode
: TCP Server / TCP Client / UDP
Setup
: HTTP Browser Setup (IE & Netscape), Console
Security
: Setup Password
Protection
: Built-in 1.5KV Magnetic Isolation
WiFi port
Standard
: 2.4G IEEE 802.11b/g/n
Data Rate
: 11/54/72.2 Mbps @ 20Mhz Band Width
Modulation
: DSSS; OFDM
Frequency
: 2.4GHz
Tx Power 11b
: Max. 22dBm
Tx Power 11g/n
: Max. 19dBm
Rx Sensitivity
: -76dBm @ 54Mbps, -89.5dBm @ 11Mbps
Tx Rate
: Max. 54Mbps with auto fallback
Tx Distance
: Up to 100m
Security
: WEP 64-bit / 128-bit data encryption, WPA / WPA2 personal
Antenna
: 2 dBi, RP-SMA connector
Network Mode
: Infrastructure; Soft AP (for Setup)
Setup
: HTTP Browser Setup (IE, Chrome, Firefox)
Security
: Login Password
Serial Ports * 4
Port
: RS232/422/485 * 4 Port (RS-232 - RX/TX only)
Port
: RS422 / 485 (Surge Protect)
Speed
: 300 bps ~ 230.4Kbps
Parity
: None, Odd, Even, Mark, Space
Data Bit
: 5, 6, 7, 8
Stop Bit
: 1, 2
RS-232 Pins : Rx, Tx, GND
RS-422
: Rx+, Rx-, Tx+, Tx- (Surge Protect)
