4. Filter
5. Juice tank
6. Main Housing
7. Lever
USING THE EXTRACTOR
Before using the juice extractor, make sure
that the motor unit switch is off. In this way,
if the assembly has not been completed, the
motor unit will not be switched on and un-
necessary damage and personal injury will
be avoided.
BEFORE STARTING
Before preparing juices for the first time,
wash all the pieces.
Before starting, make sure that the filter and
the drive shaft are properly in place. Place
the juice jug under the pouring hole.
3. MAINTENANCE & CLEANING
ො Turn off and unplug the appliance and wait until the filter stops rotating completely
before cleaning the appliance.
ො Try to keep the engine clean and dry whenever you use it. The appliance is easier to
clean if done immediately after each use.
ො Never immerse the motor in water or rinse it under the tap. To clean the motor unit,
use a damp cloth.
ො Separate and clean all parts with a brush using warm water and a little liquid soap and
then rinse under the tap.
ො Do not use abrasive cleansers, sponges, acetone, alcohol, etc. to clean the appliance.
ො If you are not going to use it for a prolonged period, store it in a dry and well-ventilated
place, in order to prevent the motor from getting wet.
ො The following parts can be cleaned in the dishwasher: cones and covers, filters and juice
tank.
