or
Clean
out
your
water
systems.
Drain
your
pipes, other
holding
tanks, and
the
hot
water heater.Clean
your
tanks
using
laundry
detergent
by
mixing
the
detergent
with
water, refill
the
tanks
with
the
soapy
water,
the
sloshing
motion
from
driving
will
clean
all
the
nooks
and
crannies
of
your
tanks. Then, drain
the
tanks
a
second
time.
Install
the
water
tank.
Sanitize the system using bleach. We recommend 180-240ml of bleach per 40L of water that your fresh
water tank can hold. Fill the tanks up, add the bleach and let it sit for a minimum of one hour. If possible,
drive around with this solution in the tank. This will make the water swoosh around and aid in getting the
bleach solution all over the tank. Let this solution sit in the tank for a few hours. Then, drain the system
again, open all faucets and let the water drain out. Let your RV water system stay with that bleach smell
for another 3 hours at the very least. You can now refill and drain the tank as many times as possible, run
your faucet and shower until you make sure there is no trace of bleach left in the system. At this point,
your new holding tank and water system should be ready to use.
X2
X2
INSTALLATION
1.
2.
3.
