Fit the Mirrors
Secure Bolts & Backing Plates
The top mounting holes in the door are already fitted with securing nuts so for this you will just
need the securing bolts with washers.
To secure the base holes you will need to place the supplied backing plates (FIG 3) on the inside
of the door skin. These plates have already been fitted with fixing tapes. Clean the area inside
the door with wax and grease remover prior to placing the plate over the pre-drilled holes.
Position your mirror, insert the securing bolt with washers through the hole of the metal grommet
(FIG 4) and then into the hole of the mirror base. Hand tighten the bolt with a Phillips screwdriver.
Figure 3
Figure 4
Tighten Four Securing Bolts
Once you are happy that your mirror is aligned and in place, you can fully tighten the four
securing bolts with a socket. (FIG 5)
Figure 5
3
.
