OPERATING INSTRUCTIONS
1. With assistance, carefully lift your rooftop tent
and place it onto the top of the roof racks or
crossbars of your vehicle and ensure that the
mounting channels are perpendicular to the racks
or bars they will be mounted to, and that the tent
is centered on the roof rack.
2. Slide the bolts and channel sliders into the
mounting channels. You will need to lift your
rooftop tent side, so as to have one of the bolts on
the inside of the roof rack. Repeat the same steps
for the remaining three sides.
3. Use a steel mounting plate and nuts to secure
the bolts at each of the four corners where the rack
and mounting channel cross. Tighten all eight bolts
securely. It is important that you check all the
mounting bolts and brackets periodically to ensure
they are securely fastened to your base and roof
rack or crossbars.
Insert the rubber end caps into the ends of the
mounting channel (this may require light taps from
a hammer) after ensuring the tent is positioned
correctly, and all eight bolts are tightened securely.
5
FITTING TO THE ROOF RACK OR CROSSBAR