- 5 -
4. Remove lock cover
Remove the lock cover(18) from the adapter(19).
5. Connection
Connect flexible tube(16) from the faucet with adapter(19). Then, please clip
them With fastener clip(17) until there make a "click sound". After making sure
the connection is done in perfect, please attach the lock cover(18) onto a
fastener clip(17).
6. Work testing
Please go to "Flushing instruction" section before starting to use faucet.
CAUTION!
Please pay attention to the following points when installing the faucet.
* Install the supply tube to the cold and the hot supply side properly. Don't tangle
the tube when installing because the connection will become loose when the
strong water pressure is added.
* Keep enough distance between the tubes. Without the distance, the tube will
rub each other and it will cause damage to the tube.
* When bending the tube, keep the radius more than 50mm. Excessive bending
will cause damage to the tube.
* When installing the faucet, do not excessively bend the ending part of the tube.
* "C" mark on the supply tube stands for cold water supply use.
* "H" mark on the supply tube stands for hot water supply use.
2. Install faucet
3. Install "quick fastener" adapter
Please install the adapters(19) onto the each stop valves(not supplied).
Please don't forget packing(20) between angle stop valve and adapter(19).
The front side of the spout should face you. Then, make tightening the lock
nut(15).
(counterclockwise) Please don't forget to put a seat packing(12), rubber
packing(13), and metal washer(14), between unit body(11) and lock nut(15).