Samyung Nf100, User Manual

Page: 34 / 85

User Guide
34
3-6
Sonar
It is possible to use the Sonar function when it is connected to the transducer.
Follow the following steps to activate the Sonar function.
1 Press
and hold, select System Setting
2 Select additional component and select Sonar.
3 Press
and press
.
Then select Sonar. This will move to the Sonar
3-6-1
Display Description
①
Depth
②
Single Fish: Fish symbol with depth
③
School of fish
④
Depth line
⑤
Bottom: Hard bottoms such as rock and
coral shown as wide bands. Soft bottoms
such as mud, weed and sand shown as
narrow bands.
⑥
Range
⑦
Display moves from right (latest sonar
record) to left (old sonar record).
3-6-2
Mode
You may choose from two modes.
• Auto mode: This function is used while
vessel is moving. The unit adjusts the
setting of bottom of water according to the
environment automatically
• Manual mode: This function is used when
the user wants to adjust the setting to fit
the environment. This brings the best result
for the user.
To change the mode
1 Press
then select Gain.
2 Select Mode then choose Manual or Auto
mode.
3 Press until it returns to the Sonar
window.