63
NO OPERATOR
[CHANGE]
–
The response after changing the communication frequency at the called
station, which received an Individual call. In this case, if the frequency, which cannot
be used as follows, comes in the response, it does not change to the corresponding
frequency.
8-1-2
RECEIVING AN INDIVIDUAL CALL
1) Set up REFUSE auto responder
If the communication frequency or mode of the received call is not available, you can set
the answer back function by putting [UNABLE TO USE CH] in REASON.
➜
➜
[1.DSC SETUP]
➜
➜
[4.AUTO ACK SET]
➜
In
[4.AUTO ACK INDIVIDUAL : ON] you can turn ON.
2) Send a manual response
①
There are [ACCEPT] / [REFUSE] / [CHANGE] types when sending a manual response.
