Samyung ENC SDA-450N, Installation & Operation Manual

Page: 15 / 78

Installation
SAMYUNG SDA-450N Installation & Operation Manual Page 15
II.2.2 Remove the fixing bolts before installation
Before installing the antenna unit, you must remove the fix bolts of the
antenna inside.
1. Remove the 6 bolts securing the radome from antenna unit
base and open the radome.
2. Remove 2 bolts tagged to secure the antenna frame
during the shipment.
3. Inspect the antenna unit for shipping damage.
AZ fixing bolt location EL fixing bold location (Remove the bolt)
4. Please try to operate the dish of Azimuth and Elevation at the end of the limit switch, after
removing bolts.
5. Cover the radome with bolts tightly after checking all system completely. You can fix easily the
upper and lower of the radome after matching the triangle label of lower radome to the center
of logo.
6. Start to install the antenna.