Samyung ENC SAR-9, Instruction Manual

Page: 13 / 39

SAR-9 13
To extend the mounting pole:
1. Grasp EVA (rubber) cover at bottom of pole, and twist the pole to release it in the
pole mount. Pull the pole down and twist to lock in place in the pole mount.
2. Remove EVA (rubber) cover from bottom of pole; allow pole sections to drop. Lock
sections together by twisting each section.
To deploy in a survival craft (liferaft):
1. Extend the SART supporting pole as detailed above.
2. Tether the SART to a suitable point using the lanyard which unwinds from its
base.
3. Inset the SART through the port in the canopy.
4. Position the bottom of the support pole in the antenna pocket. Secure the pole
to the canopy support.
Some survival craft have the SART already packed as part of the inventory. In general,
these models of SART are not fitted with the support pole. The SART should be
swithed ON then suspended by its top loop from the highest point of the survival craft.
If the lanyard becomes unwound, it may be rewound by rotating the spool in the base
of the SART in the direction of the arrow.
Figure 5. SAR-9 SART life raft installation