20
HOW TO OPERATE OF
AIS-50SET
INTO
PC
1. Connecting unit, PC serial port
DATA Communication port (RS-232) of the unit communicates with PC by type of NMEA0183
and the connection is as followings.
After connecting cables, select port on PC among a list of Select serial port and press Connect
button then the message “Connected” is displayed on the bottom of left. In case of connecting
failure, the message “Error” is displayed then you need to check out the connected cable again.
2. Execution of Program :
Start -> Program -> double clicking AIS-50SET icon
Select Serial port of PC to be connected to a unit in Select serial port. In case of no list of Serial port,
there is no Serial port at PC so that it needs to be reinstalled Program. On process of reinstallation,
press “No” button if the question of JAVA installation has.
3. Connecting AIS unit with Program
①
①
①
①
Select an available Port among Serial ports in PC.
②
②
②
②
Select “Select Serial speed” at a PORT to be connected. (Initial setup:38400)
③
③
③
③
Press “Connect” button.
④
④
④
④
If success, the message “Connected” is displayed.
Connecting success : Connected
Connecting failure : Fail
Connecting processing : Connecting
Connecting disconnecting : Disconnected
