Set Up
2. Adjust the position of the offset connectors (A) as required to allow fitting of
thermostatic valve (B) and elbows (C) - See dimension (X)
3. Screw the elbows (C) onto the offset connectors (A)
4. Set the valve body escutcheon (D) into the required position, ensuring it is in line
with the elbows (C), then mark & drill screw holes
5. Insert wall plugs to drilled holes and fix the valve body escutcheon (D) into
position using screws (E) provided.
6. It is essential that the valve body is used to ensure correct positioning, taking
care not to damage its surface finish in the process.
