SAMSys MP9210, Owner'S Manual

Page: 16 / 36

MP9210 Owner’s Manual
10
RS-232 Communication Setup
The reader is equipped with a 9-pin RS-232 communication port for
communication directly with a PC or other serial device.
To set up a reader network with RS-232 communications, perform the
following steps:
1. Insert the 9-pin male plug on the RS-232 cable into the 9-pin
female connector on the end panel of the reader.
2. Insert the 9-pin female plug into the 9-pin serial port of a PC or
other device.
Note: A serial port adapter may be required if the device
has a different connector type. For example, some PCs may
have 25-pin serial connectors.