17
16
Connect a USB cable to the USB port on the computer.
Connect the opposite end of the USB cable to the USB cable
port on the right side of the yepp.
●
If you disconnect the USB cable from your PC while
implementing a command or initializing during
USB driver installation, your PC may not function correctly.
5
Upon installation of the USB driver
"SAMSUNG YP-60" will appear in the
[Start]
→
[Settings]
→
[Control Panel]
→
[System Properties]
→
[Device Manager].
7
4
The USB driver is installed with a message saying that
it is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
6
USB connect cable
How to check the USB driver
●
Windows 98/ME:
Control Panel
→
System
→
Device Manager
→
Disk drives
→
SAMSUNG YP-60
●
Windows 2000:
Control Panel
→
System
→
Hardware
→
Device Manager
→
Disk drives
→
SAMSUNG YP-60 USB Device
●
Windows XP:
Control Panel
→
System
→
Hardware
→
Device Manager
→
Disk drives
→
SAMSUNG YP-60 USB Device
When the USB driver is not installed automatically, refer to the next page.
8
Connecting the yepp to a PC with a USB cable
Connecting the yepp to a PC
YP60_AME ENG i 9/21/04 9:2212:0 Page 16
