7. After disconnect the "Removable disk"safely, disconnect the USB cable of the YP-T6.
8. After Entering the YP-T6's Menu
→
Settings
→
System
→
About, check the firmware version.
9. All is done. Thank you.
FAQ)
1) It doesn't work after upgrading the firmware.
→
It is recommended to connect YP-T6 to the PC in recovery mode and upgrade the
firmware.(Refer to the above procedure.)
2) While connecting USB in recovery mode, there is protocol error..
→
Use the rear USB port of the PC for connecting USB.
(It is recommended for upgrading the firmware safely)
