25
MP3 Encoding
Recording Voice
24
1
Slide the switch to the ENC position to begin Voice Recording.
2
To stop the recording, move the switch in the opposite direction and
a new voice file will be created.
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2
Slide the switch to the ENC position begin MP3 encoding.
●
To pause during Encoding, press the
√
/
❙❙
button. Press the
√
/
❙❙
button once again to
recommence recording.
3
Slide the switch to the REC position while recording to stop the encoding,
and a new encoding file will be created.
●
Recording will take place in the order of L001, L002, L003….
When the encoding is finished, the files will be saved as MP3 files in the LINE_ENC folder.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
- If the Memory is full, the Voice Recording is stopped automatically.
- Voice Recording does not work in FM Mode or when the Line In cable is connected.
✍
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
- Bit Rates can be set within the range of 32Kbps~128Kbps.
- You can adjust the volume during encoding monitoring.
✍
N
N
N
N
o
o
o
o
tt
tt
ii
ii
c
c
c
c
e
e
e
e
- Do not disconnect the Line cable during Encoding.
- If the battery is not charged enough, encoding will not be done.
- Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
✍
Recording Time
Remaining Time
