Samsung Yepp YP-30S, Service Manual

Page: 15 / 24

Exploded View and Disassembly Order
Samsung Electronics 6-1
6. Exploded View and Disassembly Order
AH64-01376A
AH97-00789A
AH97-00790A
AH97-00791A
AH97-00792A
AH64-01407A
AH64-01379A
AH64-01382A
AH61-00790A
6003-001257
AH92-01100A
AH92-01382A
AH07-00059A
AH64-01381A
AH39-00301A
AH59-01014A
AH61-00845A
AH63-00380A
AH63-00328A
AH97-00844A
AH80-00028A
CABINET-TOP;YP-30S,ANODIZING,AL,0.7T
ASSY-CASE BOTTOM; ASSY, YP-30S
ASSY-FRAME TOP; ASSY, YP-30S
ASSY-FRAME BOTTOM; ASSY, YP-30S
ASSY-COVER BATTERY; ASSY, YP-30S
WINDOW-LCD; YP-30S, ACRYL, 1.5
KNOB-HOLD; YP-30S, ABS
DECORATION-RING; YP-30S, ABS
HOLDER-LCD; YP-30S, ABS
SCREW-TAPTITE; PH, +, B, M1, L, L6.5, NI PLT, SW
ASSY PCB-MIC; YP-30S, ONE-BOARD (For 64MB YP-30S)
ASSY PCB-32MB-ONE-BOARD; YP-30S(For 32MB YP-30S/CT)
LCD; UG-12T14-FGHT X-A, YP-30S, -, 32X4
KNOB-VOLUME; YP-30S, ABS
CABLE FORM; YD-150B, YP-MF64,4P, 1.2M, -,-,PVC, BEIGE, 4PX1200MM,-,USB CABLE
SPEAKER SYSTEM; YP-30S, YH-30SGU, 0.22V,0.2
HANGER-NECKLES; YP-30S
BAND; -,-,PVC, YP-30S,DOMESTIC(For Asia)
BAND-ARM; -,-,PVC,YP-30S(Except Asia)
ASSY-CRADLE; -,YP-30S
INSTALL-MFN CD; YP-30S,30S CD, CD, KOR-CD
Disassembly and assembly method
1. Remove No . while pressing No. "PUSH OPEN".
2. Remove No.
3. Remove No.
6. Remove No.
9. After lifting No. up from the connector lightly, apply heat with a soldering iron on the soldering part.
10. Separate No. and No. .
1. After ensuring No. is properly placed at No. , insert frame (without care, SW2 or SW3 may be damaged).
3. Securely insert No. and No. into the No. connector and then fix them at the PCB.
4. When properly placing No. (+, -), adjust orientation accurately.
(Back light soldering condition of LCD: 360˚C, within 2 seconds)
2. Since a flaw may occur if lifting No. up from the lower part and then inserting it, lower it down from the upper part for insertion.
Cautions in assembling
7. Lift No. up (separate it No. , No. , No. and No. ).
8. Lift the No. LCD connector up.
5. Carefully extend No. a little, and lift up and remove it along with the main body
4. Pull and remove No. while pressing the upper part of No. (take care so that No. switch would not be pressed).