Disassembly and Reassembly _ 25
Part
figure
Description
Heater
4. Remove the nut holding the heater and
separate the Heater.
Use box Drivers (Socket size: 10mm)
5. Remove the Heater from the Tub
Caution
Make sure to insert the Heater into the
correct position of the bracket inside the
Tub when reassembling it. Otherwise, there
is a danger of a fire.
Make sure to push it inwards until the
packing part comes into the Tub completely
when reassembling it so that the packing
part is completely stuck to the Tub. Fasten
the holding nut with a force of 5Kgf/ cm2.
If the nut is not fastened properly, there is a
danger of water leaking.
WW22N6850NX-A2_SM.indb 25
2018/2/1 17:15:45
