English
English
43
Special features
AddWash (applicable models only)
To add laundry after the wash starts, use the AddWash door.
1.
Tap and hold to stop the wash cycle.
2.
Press the upper area of the AddWash door to
unlock the door. The door will move inward slightly
when you press it and then open.
3.
Open the AddWash door fully, and then insert
additional laundry through the AddWash door into
the drum.
4.
Lift the AddWash door back into position, and then
lock the door by pushing the upper area of the door
until you hear a click. Then, tap and hold again
to resume the wash cycle.
CAUTION
Do not put excessive force on the AddWash door. It
may break.
NOTE
The water inside the drum does not leak if the AddWash door is closed properly. Water drops may form
around the AddWash door, but water will not leak from inside the drum. This is normal.
CAUTION
•
Do not open the AddWash door if suds have formed inside the drum that rise above the level of the
Addwash door.
•
Do not attempt to open the AddWash door while the machine is operating without first tapping and
holding . Please note that the AddWash door can be opened unintentionally (without tapping and
holding ) when the wash is complete.
•
Do not add an excessive load through the AddWash door. Performance may be degraded.
•
Do not use the lower area of the AddWash door as a handle. Your fingers may be caught.
•
Make sure that no laundry is caught in the AddWash door.
•
Keep your pets out of the washing machine, especially the AddWash door.
•
When using hot water for the wash, the AddWash door may appear to leak water after opening and
closing the AddWash door. This is normal, simply because steam emerging from the open AddWash door
has cooled and formed water drops on the surface.
U-PJT_WASHER-MD_SimpleUX_DC68-04220A-01_AU_EN(����+�7.5��).indd 43
2020/9/29 13:02:42
