Operations
English
34
Operations
04
Spin
Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
•
Rinse Hold
: The final rinse process is suspended so that
the laundry remains in the water. To unload the laundry, run a
drain or spin process.
•
No Spin
: The drum does not rotate after the final drain
process.
•
Spin Only
: To run the Spin Only cycle, press
Spin
for 3
seconds. When the cycle time and spinning speed appear, press
Spin
repeatedly until a desired spinning speed is selected.
Then, press
Start/Pause
to start the cycle. The spinning time
depends on the selected cycle.
05
Options
Press to select an option from Intensive, Pre Wash, and Rinse+.
Press again to deselect.
• Availability of the options depends on the cycle.
06
Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
07
Soak
Press to activate/deactivate the Soak function. This function helps
remove a wide variety of stubborn stains.
08
Power
Press to turn on/off the washing machine.
09
Start/Pause
Press to start or stop operation.
For more information on the options, see the “
Special features
” section.
*(Hold 3 sec) : Press and hold for 3 seconds.
Untitled-11 34
2017-12-19 8:04:09
