Samsung WW1 M8 Series, User Manual

Page: 23 / 316

English 23
Installation
C
3. Hold the adaptor and turn part (C) in
the arrow direction to loosen it by 5
mm (*).
C
4. Insert the adaptor onto the water tap,
and then tighten the screws while
lifting the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
D
6. While pulling down part (D) on the
water hose, connect the water hose to
the adaptor. Then, release
part (D) . The
hose fits into the adaptor with a clicking
sound.
7. To complete connecting the water hose,
see 2 and 3 on the “ Connecting to a
threaded water tap ” section.
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
Untitled-9 23 2018-06-29 5:12:14