3
CONTROL PANEL
1. WASH SELECTOR
• This is used to select wash action.
2. WASH TIMER
• This is used to set the wash time, 1-15 minutes.
3. CYCLE SELECTOR
• This is used to select the Washing / Rinsing or draining.
4. SPIN DRY TIMER
• This is used to set the spin time, 1-5 minutes.
5. WATER SELECTOR
• During washing, WATER SELECTOR KNOB should
be selected to wash. During spin rinsing, WATER
SELECTOR KNOB should be selected to spin.
WASHING PROCEDURE
TO WASH
1. Before starting washing, check the
following;
Connect the water supply hose and open the
water tap.
• Lay the drain hose down toward a sinkhole.
(In case no drain pump)
• Place the drain hose in sink or bath. (In
case drain pump)
• Connect the power cord to the power
supply outlet.
2. Set the CYCLE
SELECTOR
KNOB to the
desired mode.
3. Set the CYCLE
SELECTOR KNOB to
‘WASH
/
HEAVY’.
4. Set the WATER
SELECTOR
KNOB to
WASH.
5. Load laundry in the
wash tub.
6. Fill water in the
wash tub and add
the detergent.
7. Set the WASH TIMER 1-35 minutes.
SOAK
• Set the WASH TIMER to the point more than “15” for SOAK function.
• If the WASH TIMER is set to the point less than “15”, it leads to
WASH only. (No SOAK)
• Although the machine may stay still maximum 5 minutes, if the WASH TIMER is
indicated over 15 minutes position, it is just in the process of soaking and not a
breakdown.
8. After washing, set the CYCLE SELECTOR KNOB to ‘DRAIN’ for
drain.
9. Soak-Washing
1) Place clothes into the WASH TUB.
2) Turn on tap or use bucket to fill the WASH TUB with desired amount of water.
3) Put detergent depending on the water volume and detergent package indications.
4) Set WASH TIMER to point between “15” to “35” in the timer.
• Soak-Washing automatically starts the wash (15 min.) after the soak
(2 to 20 min.) is completed.
• The SOAK function (20 min.) repeats the cycle that is 1.5 ~ 2.0 min.
turning and the next 5 min. resting 3 times.
