Samsung WM55R-W User Manual Download Page 11

Page: 11 / 70

Ports

LAN

SERVICE

AUDIO

OUT

HDMI IN 2

HDMI IN 1

TOUCH

OUT

(1.0A)

USB

The colour and shape of parts may differ from what is shown. Specifications are subject to change without

notice to improve quality.

Ports

Description

USB

(1.0A)

Connect to a USB memory device.

The USB ports on the product accept a maximum constant current of 1.0A. If the

maximum value is exceeded, USB ports may not work.

LAN

Connects to a network using a LAN cable. (10/100 Mbps)

Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair.

SERVICE

Dedicated to service technicians.

This port is for servicing only and has no user function. Do not connect a cable to

this port.

HDMI IN 2

Connects to a source device using a HDMI cable.

HDMI IN 1

TOUCH OUT

Allows touch-based control of the PC screen connected through the

HDMI IN 1

HDMI

IN 2

port. Use a USB cable to connect between the

TOUCH OUT

port on the rear of the

product and the PC.

AUDIO OUT

Outputs sound to an audio device via an audio cable.

Summary of Contents for WM55R-W







































































Search results

Summary of Contents for WM55R-W

Reviews:

Related manuals for WM55R-W

Brands by name

Popular brands

Samsung WM55R-W, User Manual

Search results

Summary of Contents for WM55R-W

Reviews:

Related manuals for WM55R-W

Brands by name

Popular brands